1-800-908-8082
8am-5pm Pacific Time
Monday - Friday


Surplus Electronics and Mechanical Parts

Contact Us
My Account
Shopping Cart

Electronics  |  Mechanical  |  Shopping Cart  |  My Account  |  Contact Us  |  Store Policies  |  Sell Your Surplus

Electronics

Batteries
Buzzers
Circuit Breakers
Connectors
Counters
DC to DC Converters
Fans
Fuses
Fuse Holders
LEDs
Lamps
Lamp Holders
Meters
Motors
Potentiometers
Relays
Rubber Feet & Bumpers
Semiconductors
Sensors
Speakers
Switches
Transformers
Wire

Mechanical

Bearings
Chain
Gauges
Hardware

Shock Absorbers

Sprockets
Tires and Tubes
Wheels

 

 
 

Speakers



 
1" 8 Ohm Headphone Neodymium Speaker Element

Brand new factory buyout surplus headphone speaker replacement element made by Phillips. These headphone speakers are 1-1/8" diameter and they have a removable white paper strip on the front of them which protects the mounting glue. To mount these speakers simply pull off the white paper and stick the speaker in place. These speakers feature extremely strong neodymium magnets and have solder on connectors on the back side of the speaker.
Made by: Phillips
Mfg's Part #'s: 13002 5382 0932 UA
Watts: Unknown (we tested these drivers and found they can handle several Watts of power without distorting or getting too loud to place up to your ear.)
Ohms: 8 Ohms
Dimensions: 1-1/8" Diameter x 1/4" Deep

$0.95

Item # 1188



 

 
3" 0.3 Watt 8 Ohm Hobby/Project/TV/Radio Speaker

Brand new factory buyout surplus item AAC Acoustic brand 3' OD 0.3 Watt 8 Ohm full range speaker. This is a small and efficient speaker with a magnetically shielded alnico magnet, 1/2" diameter voice coil, and a traditional paper cone.
Made by:
AAC Acoustic
Mfg's Part #'s: DSS7808
Watts: 0.3 Watts 
Ohms: 8 Ohms
Dimensions: 3" O.D. x 1" Deep
Weight: 0.10 lbs.

$1.95

Item # 1227



 

 
3" 1 Watt 8 Ohm Hobby/Project/TV/Radio Speaker

Brand new factory buyout surplus item MG Electronics brand model FE 300 3' OD 0.5 Watt nominal power, 1 Watt maximum power, 8 Ohm full range speaker. This is a small and efficient speaker with a large ferrite magnet structure, 1/2" diameter voice coil, and a traditional paper cone diaphragm.
Made by: MG Electronics
Mfg's Part #'s: FE 300

Power Rating: 1/2 Watt Nominal Power, 1 Watt Maximum Power

Ohms: 8 Ohms

Dimensions: 3" O.D. x 7/8" Deep
Weight: 0.10 lbs.

Our Item # 240

DIA (mm)

HEIGHT (mm)

NOM (watt)

MAX (watt)

IMP (Ohm)

FO (Hz)

SPL (dB)

FREQ. RANGE(Fo-Hz)

MAGNET SIZE (OZ)

NET WEIGHT (G)

77

23.6

.5

1

8

260

88

5000

32øx18x6

65

$1.95

Item # 1240



 

 
3.5"x1.5" 6W 12 Ohm Computer / TV / Radio Speaker

Brand new Sharp model 1004PB34CA K57P10 3.5"x1.5" full-range speaker. Factory rated at 6 Watts and 12 Ohms. This speaker has a large magnetically shielded ferrite magnet structure, 1/2" diameter voice coil, traditional paper cone, and a butyl rubber surround (yes this little speaker has a rubber surround). Due to their high-quality construction these little speakers sound great.
Made by: Sharp Electronics
Mfg's Part #'s: 1004PB34CA and K57P10

Power Rating: 6 Watts Nominal Power
Ohms: 12 Ohms
Speaker Dimensions: 3.5"x1.5" OD (measured from outside of speaker surround)
Overall Dimensions: 4.75"x1.75" (10x4cm)

$2.95

Item # 1332



 
2" Tweeters 8 Ohm, 3 Watt With Capacitor

These are a brand new factory buyout item 2" automotive type paper cone tweeter which include a built-on optional use capacitor to block out lower frequencies. These tweeters do not have mounting holes like most other tweeters do, so they will need to be mounted with glue, clamps or brackets. The input terminals have wire crimp connectors built-in so you simply insert the wire and crimp the connector to install the wiring onto this speaker. We believe that these tweeters were originally made for automotive use and that they may be a replacement tweeter for some models of Honda cars. They have the following product numbers printed on the back side them: 99-20423, and L23TNK
Watts: 3 Watts 
Ohms: 8 Ohms.
Dimensions: 2" O.D. x 3/4" Deep
Weight: 3 oz.

$0.50

Item # 1347



 

Enclosed 2" Speaker With Mounting Base And 6 Foot Cord

New enclosed 2" communications speaker with mounting base and 6 foot long cord with 1/8" mono jack. These speakers were originally made for older model Nokia cell phones. Built-in volume control on top and an adjustable swivel base. These speakers have a high quality look and feel to them.
Made by:
Nokia
Item #: M-11-SPK, Nokia LX-11 External Speaker

Watts: Unknown
Ohms: 8 Ohms.
Dimensions: 3=1/4" Tall x 3-3/4" Wide x 2" Deep
Cord Length: 6 feet
Connector Plug: 1/8" mono plug

$5.95

Item # 1251



Copyright 2013 eSurplusElectronics.com, an Electricruz Inc. Company, all rights reserved